Skip to content
by Eclipse Metal Roofing · CSLB #888710 (424) 577-4417

Who Runs This Site

About Best Metal Roofing Contractor

Best Metal Roofing Contractor is the name of this website, not a rating. It is operated by Eclipse Metal Roofing, a residential metal roofing company owned by Uldi Zadok. We built it to help Los Angeles homeowners compare metal roofers with facts they can check, and we are glad to be measured by the same checklist.

  • CSLB #888710
  • Since 2006
  • Fabricated in Van Nuys
  • No Subcontractors
Crew installing standing seam panels on a white two-story hillside house

Who We Are

Eclipse Metal Roofing has worked on Los Angeles homes since 2006. The company is licensed by the California Contractors State License Board under license #888710, held by Eclipse Remodeling & Roofing Inc, doing business as Eclipse Metal Roofing, with the C-39 Roofing and C-43 Sheet Metal classes. You can confirm it yourself on the CSLB license check by entering 888710.

CSLB#888710C-39 · C-43

  • Since2006
  • CSLB#888710
  • Fabricated inVan Nuys
  • ResidentialHomes only.

Custom-Fabricated In-House

Standing seam metal roofing is our specialty. Every panel we install is custom-fabricated in our own shop in Van Nuys to the measured length of the roof plane it goes on. Ridge caps, valleys, wall flashings and edge trim are formed in the same shop from the same coil, so the pieces match in color and fit the roof they were made for.

We also install corrugated metal and metal roofing that imitates shake, tile or slate.

Black standing seam metal roof planes meeting at a hip, with a skylight and a stone chimney

No Subcontractors, Ever.

The people who install your roof work for us. We do not sell a job and pass it to another company. On a metal roof, much of the quality sits in work nobody sees once it is finished: the deck repairs, the underlayment and the flashing at every wall and opening. We want the people doing that work to answer to us, and us to answer to you.

What We Do, and How

  • Homes Only.

    We are a residential company.

  • Tear-Off to the Deck.

    We do not lay new panels over an old roof, so the deck can be seen and repaired.

  • A Written Scope.

    Every proposal names the panel, finish, underlayment and flashing details, so you can compare it with any other bid.

  • Permits and Inspections.

    We pull the permit and meet the inspector.

Roofer fitting standing seam panels at the lower eave of a white house with green shutters

Where We Work

From our Van Nuys shop we work across Los Angeles: Pacific Palisades, Brentwood, Bel-Air, the Hollywood Hills, Sherman Oaks, Studio City, Woodland Hills, Santa Monica, Beverly Hills, West Hollywood, Venice, Marina del Rey, Playa del Rey and Malibu.

Our main website is eclipsemetalroofing.com. If you are comparing contractors, start with how to choose a metal roofing contractor, or contact us to add us to your shortlist.

Estimates

Put Us on Your Shortlist

Tell us about the house and the roof that is on it now. We will come out, measure, look at the deck and flashings where we can, and give you a written scope you can compare line by line with any other bid.

(424) 577-4417

CSLB #888710 · Panels custom-fabricated in-house in Van Nuys · No subcontractors, ever.

FAQ

Questions Los Angeles Homeowners Ask

Who owns Eclipse Metal Roofing?

Uldi Zadok. The company has worked in Los Angeles since 2006 under CSLB license #888710.

Is "Best Metal Roofing Contractor" an award?

No. It is the name of this website. We would rather you judge us with the questions to ask a metal roofing contractor.

Where are your panels made?

In our own fabrication shop in Van Nuys. Panels and trim are custom-fabricated in-house for each roof.

Do you work on commercial buildings?

No. We are a residential company, and every roof we install is on a home.

Call Now Estimate